CCL Lever Lock Handle - SKU: 1000RH 

  • ccl_1000RH_lock_handle_dimensions
  • ccl_1000RH_lock_handle_side_dimensions
  • ccl_h1_cam_installed_with_h3_holding_plate
  • ccl_h2_cam_installed_with_h3_holding_plate

CCL Lever Lock Handle


Features & Benefits
  • Material: Pressure Cast Handle, Steel Zinc Plated Spindle
  • Operation: Furnished for one, two or three point locking, right or left hand doors, with 90 or 180 degrees rotation (90 degreed RH regularly furnished)
  • Cam Positioning: Square spindle allows cams to be mounted at 12, 3, 6, and 9 o'clock
  • Rods and Guides: Not furnished
  • Spindle Length: Regularly furnished 25/32" and 3-1/2" long (measured from back of escutcheon).
  • Surface Mounting: In addition to mounting shown, handles are available with attaching holes through face of escutcheon for surface mounting, countersunk for #10-32 screws. Screws not furnished.
  • Rekeying: Plug removal access hole added to shank of handle to allow for removal of plug assembly for rekeying purposes. To remove plug, insert key and rotate 90 degrees. Insert small tool (e.g., paper clip) in access hole and depress retainer while pulling key and plug out of handle.
  • Mounting Hole Dimensions: 1 1/2" from center to center.

NOTE: H1/H2 Cams and the H3 holding plate are not included and may be ordered here or scroll down below. Please see the last two thumbnail images for installation photos of the cams and holder plate.